CONEVO Spot Stock Overview: From Interface and Logic to Power and Discrete Devices

In an electronic bill of materials, interface, logic, memory and power chips often come from different manufacturers and product lines of different eras. For engineering and procurement teams, parameters can be confirmed against datasheets; the real difficulty lies elsewhere — whether a device is still in production, whether lead times match the production schedule, and whether a verifiable alternative source exists once a part is discontinued. CONEVO is an IC distributor based in Hong Kong and Shenzhen, covering a full range of components including FPGAs, MCUs, DSPs, data converters, PMICs, memory and passive devices, meeting customer requirements for sourcing inquiries and procurement.

The following reviews ten recent popular part numbers from CONEVO's IC lineup, grouped by function into three categories — signal chain and interface, programmable logic and memory, and power and discrete devices — with key selection information such as package and supply voltage noted for each.

1792479535171.jpg 

I. Signal Chain and Interface

ADV7623BSTZ-P (ADI) is a four-input, one-output HDMI transceiver integrating HDMI receiver and transmitter functions with digital audio I/O. It supports Xpressview fast switching, 225MHz TMDS, and 36-/30-/24-bit deep color, with internal EDID RAM and adaptive equalization. This suffix denotes the non-HDCP version. It comes in a 144-LQFP (20mm × 20mm), operates from dual 1.8V/3.3V supplies, and is rated for commercial 0~70°C.

GN1158-INTE3Z (Semtech) is a 1.0~11.3Gbps multi-rate SR transceiver chip covering 1G/10G Ethernet and 1/2/4/8/10G Fibre Channel. The VCSEL driver section delivers a maximum bias current of 15mA and a maximum modulation current of 20mApp, with integrated closed-loop Automatic Power Control (APC). The receiver side is a limiting amplifier with 5mVppd sensitivity at 11.317Gb/s. It operates from a 3.3V supply in a 28-QFN (4mm × 4mm), with 180mW typical power dissipation.

TMS320C6424ZWT5 (TI) is a C64x+ fixed-point DSP running at 500MHz, with 240KB on-chip RAM and 64KB ROM, core voltage of 1.05V/1.20V and I/O at 1.8V/3.3V. Interfaces include EMIF, HPI, I²C, McASP, McBSP, UART and a 10/100M Ethernet MAC. It comes in a 361-NFBGA (16mm × 16mm) and suits telecom, audio and industrial processing.

AD8048ARZ-REEL7 (ADI) is a single-channel voltage-feedback op amp with 250MHz typical −3dB bandwidth, 160MHz gain bandwidth product and 1000V/µs slew rate, stable at a gain of ≥2. It provides 50mA output current and 6.6mA quiescent current, runs from ±3~±6V dual supplies, and comes in SOIC-8, rated −40~85°C.

II. Programmable Logic and Memory

LFE5U-25F-6BG381I (Lattice) is an ECP5 series FPGA with approximately 24,000 logic elements, about 1.03Mbit of embedded RAM and 197 user I/Os, at a core voltage of 1.045~1.155V. It comes in a 381-CABGA (17mm × 17mm), rated −40~100°C, and suits industrial control, interface bridging and I/O expansion.

GAL22V10D-4LJN (Lattice) is a high-performance E²CMOS PLD with 10 macrocells, 4ns maximum propagation delay, 250MHz maximum frequency and 3.5ns clock-to-output time. It operates from a 5V supply (4.75~5.25V) in 28-PLCC, and is function-, fuse-map- and parametrically compatible with standard 22V10 devices.

S29GL128N11FFI0 (Infineon/Cypress, formerly Spansion) is a 128Mbit (16MB) parallel NOR Flash based on MirrorBit architecture, with 110ns access time and 2.7~3.6V supply, configurable as 16M × 8 or 8M × 16. It comes in a 64-FBGA (13mm × 11mm), industrial grade −40~85°C, with 20-year data retention.

III. Power and Discrete Devices

AOZ2233CQI-02 (AOS) is an I²C-controllable synchronous buck regulator with 6.5~28V input and 8A continuous output. Output voltage is adjustable via I²C from 0.6V to 1.790625V in 9.375mV steps (±2% accuracy). It uses constant-on-time control, integrates 18mΩ high-side and 11mΩ low-side MOSFETs, and switches at 400kHz. It comes in QFN-22L (4mm × 4mm), rated −40~85°C, and suits SoC rails requiring dynamic voltage scaling.

TS317CP ROG (Taiwan Semiconductor) is a three-terminal adjustable positive voltage regulator with output adjustable from 1.25V to 37V, delivering up to 500mA in the TO-252 package, with 40V maximum input and 1.25V typical reference voltage. It includes internal thermal overload and short-circuit current limiting protection, rated 0~125°C.

AON2408 (AOS) is a 20V N-channel MOSFET with 8A continuous current, 14.5mΩ maximum on-resistance at VGS = 4.5V, gate threshold of 0.5~1.2V and 7nC total gate charge. It comes in a DFN 2×2-6L package with a 150°C maximum junction temperature, and suits load switch and battery protection applications.

IV. Supply Note

The part numbers above span a wide range, including both devices in active production and those already discontinued or subject to extended lead times. CONEVO is a spot-stock IC distributor based in Hong Kong and Shenzhen, supplying a full range of electronic components and supporting customer inquiries as well as one-click procurement against a BOM list. In addition, for discontinued or constrained part numbers, cross-brand comparison by parameter is available, along with inspection, buffer stock and shipping arrangements.

Website: www.conevoelec.com

Email: info@conevoelec.com

Contact Information
close